27°CChennaiClear
Science & Innovation

Chennai Start-Up Builds EV Motors Without Rare-Earth Magnets

Viridian Ingni Propulsion, incubated at IIT Madras Research Park, raised ₹1.47 crore to put its ferrite-magnet e-rickshaw motor into pilot production.

Viridian Ingni Propulsion, a Chennai start-up incubated at IIT Madras Research Park, has raised ₹1.47 crore to move its electric motors from prototype to pilot production. Its first motor, for e-rickshaws, uses ferrite magnets instead of the rare-earth magnets that most EV motors depend on.

The numbers

₹1.47 crPre-seed round led by Inflection Point Ventures
₹53.75 lakhGrants received earlier
94%Peak efficiency of its e-rickshaw motor
350Motors under letters of intent

Why rare earths matter

Most motors in electric two-wheelers and cars use permanent magnets made with rare-earth elements such as neodymium. India imports nearly all of them, mostly from China, and supply curbs in recent years have hit Indian EV makers. A motor that works well without those magnets reduces that dependence.

Viridian’s approach is a ferrite-assisted synchronous reluctance motor, known as PMa-SynRM. It relies mainly on the shape of the rotor to produce torque, with cheap ferrite magnets giving it an extra push. The company targets e-rickshaws, two-wheelers, HVAC compressors and solar pumps with this design. For drones, robots and marine uses, where every gram counts, it also makes conventional rare-earth motors.

The first product

The L3 e-rickshaw motor runs on 48 volts, with 1.2 kW rated and 2 kW peak power. It weighs 8 kg and comes with gear ratios of 10:1, 12:1 or 16:1, according to Indian Startup News. Founder and CEO Sriram G started the company in February 2024. He says the team designs the motor, controller and firmware together, which helps tune efficiency.

5

Engineers on the team. The company is pre-revenue, with letters of intent for 350 motors from Crop Xplore and Yali Mobility.

Where the money goes

The round will pay for manufacturing tooling, a pilot line, certification with ARAI and ICAT, firmware validation, hiring and working capital for first deliveries. The earlier grants came from SIPCOT, MeitY Startup Hub, NIDHI PRAYAS, the RTBI programme at IIT Madras Research Park, and Cummins CSR.

Specification L3 e-rickshaw motor
Voltage 48 V
Rated / peak power 1.2 kW / 2 kW
Peak efficiency 94%
Weight 8 kg
Gear ratios 10:1, 12:1, 16:1

Source: Indian Startup News, 31 October 2026; Entrepreneur India, 29 October 2026

What this means for you

  • These motors are not on sale yet; certification with ARAI and ICAT comes first.
  • E-rickshaw operators and small EV makers in Tamil Nadu may get a locally made motor option.
  • Rare-earth-free designs can lower exposure to import shocks, but real-world durability is still to be proven.
  • The round is small; scaling beyond a pilot line will need more capital.

What to watch

2027

ARAI/ICAT homologation and first customer deliveries.

Later

Whether it lands a two-wheeler or pump maker as a volume buyer.

Checked against published reports on 16 November 2026.

Leave a Reply

Your email address will not be published. Required fields are marked *